Manual Loading with Workpiece Carrier

Inserting the Workpiece Carrier into the Process Chamber

The CondensoXS is loaded from the front underneath the cooling. The workpiece carrier is advanced on a separate axis up to the housing, i.e. to the operator, where it can be removed and loaded. The maximum dimensions of the goods to be soldered are 650 x 650 x 95 mm. The workpiece carrier can be equipped with up to 6 lanes and has a fixed side-panel which serves as a starting point, as well as five adjustable crosspieces.

PCBs are transported strictly horizontally through the soldering system. The PCB is stationary during the vapor process. In this way, components cannot be shifted out of place while the solder is molten. This significant disadvantage of conventional vapor phase soldering systems, for which continuous vertical motion of the PCB is required during soldering, has been eliminated as a result. The scrap rate is reduced – along with your costs.


The advantages at a glance:

  • Horizontal conveyor
  • The PCBs are stationary during the entire process.
  • A high-speed handling system is available as an option.
ContactImprintPrivacyConditions of Purchase